Crossflashing Dell PERC H200 to LSI 9211-8i

bijiafeng · 发表于 2017-3-22 10:03:15

您需要登录才可以下载或查看，没有账号？立即注册

×

本帖最后由 bijiafeng 于 2017-3-22 10:34 编辑

Step 1: Downloading old firmware

Download the firmware for the Dell 6Gbps SAS HBA (this is a variant of the H200 with 8 external ports instead of 8 internal ports) and extract 6GBPSAS.FW from SASHBA_Firmware_6GBPS-SAS-HBA_07.03.06.00_A10_ZPE.exe.
Download the P07 firmware for the LSI SAS 9211-8i and extract the file 2118it.bin from 9211_8i_Package_For_P7_Firmware_BIOS_Upgrade_on_MSDOS_and_Windows.zip.
Download the P05 UEFI flasher for the LSI SAS 9211-8i and extract the file sas2flash.efi from EFI_Installer_P5.zip.
Place these three files into a directory named P07 on a FAT32-formatted USB flash drive.

Step 2: Downloading current firmware

Download the current firmware for the LSI SAS 9211-8i and extract the file 2118it.bin from 9211_8i_Package_P20_IR_IT_Firmware_BIOS_for_MSDOS_Windows.
Download the current UEFI flasher for the LSI SAS 9211-8i and extract the file sas2flash.efi from Installer_P20_for_UEFI.zip.
Place these two files into a directory named P20 on the USB flash drive.

Step 3: Downloading UEFI shell

Download an x86_64 UEFI shell. I had to use the v1 shell because my server would only show error messages (about failed assertions and files not found).
Rename the shell to BOOTX64.efi and place it into a directory named BOOT inside a directory named EFI on the USB flash drive.

Step 4: Flashing

UEFI boot your server off the flash drive
Type map -b to find the flash drive
Switch to it, e.g. by entering fs1:
cd P07
sas2flash.efi -listall should show you your controller
sas2flash.efi -c 0 -list shows you details on the controller. Note down the SAS address in case something goes wrong and you need to reprogram the SAS address.
Erase the old firmware and boot ROM: sas2flash.efi -o -e 6
Write the Dell 6Gbps firmware: sas2flash.efi -o -f 6GBPSAS.FW
Write the LSI P07 firmware: sas2flash.efi -o -f 2118it.bin
cd ..\P20
Write the LSI P20 firmware: sas2flash.efi -o -f 2118it.bin

游客，如果您要查看本帖隐藏内容请回复

翻译了下：

步骤1：下载旧固件

下载Dell 6Gbps SAS HBA的固件（这是H200的一个变体，具有8个外部端口，而不是8个内部端口），并从SASHBA_Firmware_6GBPS-SAS-HBA_07.03.06.00_A10_ZPE.exe解压缩6GBPSAS.FW。
下载LSI SAS 9211-8i的P07固件，并从9211_8i_Package_For_P7_Firmware_BIOS_Upgrade_on_MSDOS_and_Windows.zip解压缩文件2118it.bin。
下载LSI SAS 9211-8i的P05 UEFI闪存，并从EFI_Installer_P5.zip解压缩文件sas2flash.efi。
将这三个文件放在FAT32格式的USB闪存驱动器上名为P07的目录中。

步骤2：下载目前最新固件

下载LSI SAS 9211-8i的当前固件，并从9211_8i_Package_P20_IR_IT_Firmware_BIOS_for_MSDOS_Windows中解压缩文件2118it.bin。
下载用于LSI SAS 9211-8i的当前UEFI闪存，并从Installer_P20_for_UEFI.zip解压缩文件sas2flash.efi。
将这两个文件放在USB闪存驱动器上名为P20的目录中。
步骤3：下载UEFI shell

步骤2：下载x86_64 UEFI shell

步骤4：刷固件

附上固件下载地址：

游客，如果您要查看本帖隐藏内容请回复

bijiafeng · 发表于 2019-4-27 18:47:01

本帖最后由 bijiafeng 于 2019-4-27 18:48 编辑

s7912205 发表于 2019-4-24 22:46
官方没了，链接已失效，求发，谢谢

s7912205 · 发表于 2019-4-29 15:13:43

bijiafeng 发表于 2019-4-27 18:47
https://www.broadcom.com/product ... s-9210-8i#downloads

https://www.broadcom.com/products/storage ...

谢谢，已经刷完了，第一个链接有问题，我这里打不开

luckclouds · 发表于 2018-7-27 09:33:24

bijiafeng 发表于 2018-7-17 21:28
网盘链接已经失效，如有需要请留邮箱，发送给需要的网友。

斑竹，我正在找相关资料，是否可以发相关资料给我，谢谢846812016@QQ.com

BGP · 发表于 2017-4-28 12:34:25

刷固件好累，LSI被收购后文件都不好找了。

asdfasdf · 发表于 2018-7-17 08:15:14

提示: 作者被禁止或删除内容自动屏蔽

bijiafeng · 发表于 2018-7-17 21:28:35

网盘链接已经失效，如有需要请留邮箱，发送给需要的网友。

luckclouds · 发表于 2018-7-27 07:23:54

斑竹，我正在找相关资料，是否可以发相关资料给我，谢谢846812016@QQ.com

nitteo · 发表于 2018-8-14 22:20:59

下载试试，找了很久

nitteo · 发表于 2018-8-14 22:23:12

坛主，发我一份 330247153@qq.com

youyaofeng · 发表于 2018-9-26 05:50:04

谢谢，正需要呢

youyaofeng · 发表于 2018-9-26 05:52:19

版主发我一份，谢谢了，我邮箱 171677777@qq.com

asdfasdf 当前离线积分 6 窥视卡雷达卡 asdfasdf	发表于 2018-7-17 08:15:14 \| 显示全部楼层提示: 作者被禁止或删除内容自动屏蔽
asdfasdf 当前离线积分 6 窥视卡雷达卡 asdfasdf	毕嘉峰电脑技术论坛-Bijiafeng.com：论技术分享我们更专业更精确！！
	回复支持反对使用道具举报显身卡

[Other(其他)] Crossflashing Dell PERC H200 to LSI 9211-8i